You are here: Home » Solutions&Cases » Diesel Generator Solution



Tel : +86 591 2806 8999
E-mail :



Diesel generators are applied in a range of buildings, including office buildings, skyscrapers, residential, hotels, restaurants, shopping malls, schools and etc. Non-stop power supply is needed for the operation of computers, lighting, electric appliance, and elevators in these premises. Power generators usually act as standby power supply, standing by main power. The main purpose is to make up for the lack of network power supply. In the case of insufficient power supply, the power shortage will occur during the peak period of electricity consumption, and the use of power grid will be limited. The power supply department must not limit the power supply everywhere, and then the peak load power supply will be needed to relieve the power supply. Setting up peak shaving power should be done by public power supply department. Some underdeveloped countries and islands are often used as common power sources due to the imperfect power grid and insufficient power supply, leading to frequent power outages.

day and night.jpg

Requirement & Challenges

Working Conditions 

Altitude height 1000 meters and below.

Temperature down limit -15°C, up limit 55°C.

Low Noise

Quite power supply with lower noise effect on work.

Necessary protective equipments

The machine will automatically stop and give signals in the following cases: low oil pressure, high temperature, over speed, start failure.

For auto start power generators with AMF function, ATS helps realize auto start and auto stop. When the mains fails, power generator can start within 20 seconds (adjustable). The power generator can start consecutively three times. The switch from main load to generator load completes within 20 seconds and reaches rated power output in less than 30 seconds. When the mains power gets back, the generators will automatically stops within 300 seconds (adjustable) after the machine cooled.

Performance & Reliability

High-quality engine and generator ensure reliable and stable operation.

Advanced intelligent control system, comprehensive data monitoring can ensure  safe operation.


Whole set product and turn-key solution help customer use the machine easily without much technical knowledge. The machine is easy to use and maintain.

The control system has AMF function, which can auto start or stop the machine. In emergency the machine will give an alarm and stop.

ATS for option. For small KVA machine, the ATS is integral.

Low noise. The noise level of the small KVA machine (30kva below) is below 60dB(A)@7m.

Stable performance. Average failure interval is not less than 1000 hours.

Compact size. Optional devices are provided for special requirements for stable operation in some freezing cold areas and burning hot areas.

For bulk order, custom design and development is provided.

Prev: Oil Fields
Next: Military
Home Phone Message